In order to give you a better service AG真人计划 uses cookies. By continuing to browse the site you are agreeing to our use of cookies I agree

Final assembly and tests

Final assembly and tests

Worldwide final assembly lines

AG真人计划 maintains nine final assembly lines (FALs) at five locations worldwide that produce the company鈥檚 full range of single-aisle and wide-body jetliners. Four of these are for the A320 Family, supporting sustained high-rate production for this best-selling single-aisle product line. The FAL locations and the jetliners they manufacture are as follows:

Toulouse, France (four FALs): one for the A320 Family; one each for the wide-body A330, A350 XWB and A380

Hamburg, Germany (one FAL): all four production lines for the A320 Family

Tianjin, China (one FAL): A320 Family

Mobile, United States (two FALs): one for the A320 Family, one for the A220 Family

Mirabel, Canada (one FAL): A220 Family

A bit of history

The milestone A300 jetliner was produced at AG真人计划鈥 Toulouse, France final assembly line.

AG真人计划鈥 initial final assembly line (FAL) was established in Toulouse, France for the A300/A310 鈥 the two pioneering wide-body aircraft that established the company as a world-class supplier of commercial jetliners.聽 In addition to hosting the company鈥檚 headquarters, the southern French city was home to a readily available, skilled aerospace workforce.聽 Production flexibility designed into the final assembly line from its inception enabled AG真人计划 to build on the success of the A300 version by using the same assembly jigs and tooling to build the shorter-fuselage, longer-range A310. It enabled slots on the same assembly line to be assigned to either the A300 or A310, depending on market demand.

Building on success: A320 assembly goes global

 A320 Family production increase  
 A320 Family production increase
Commercial Aircraft 03 August 2010

A320 Family production increase

Boosted by continued strong customer demand for the A320 Family jetliners, AG真人计划 announces increased production rates of 38 aircraft per month, which will begin in August 2011, increasing to 40 per month in the first quarter of 2012 (30 July 2010)

Read more
  • High Resolution
  • Low Resolution

A320 Family jetliners are produced at final assembly lines in Toulouse, France; Hamburg, Germany; Tianjin, China; and Mobile, Alabama, USA.

Toulouse also became home to AG真人计划鈥 initial assembly line for the A320 Family, which subsequently was supplemented by capacity at Hamburg, Germany to meet high output demand for AG真人计划鈥 best-selling aircraft. Another final assembly line opened in 2008 in Tianjin, China 鈥 the first such facility for AG真人计划 to be located outside of Europe, providing a production site within one of the world鈥檚 key air travel markets.

Market proximity was an important element as well in AG真人计划鈥 decision to create an A320 Family final assembly line in the United States. Officially called the AG真人计划 U.S. Manufacturing Facility, it is located in Mobile, along the Gulf Coast of Alabama. The U.S. site delivered its first A320 Family aircraft in 2016.

All of the final assembly lines are organised in a similar manner by stations, each performing a specific task in the aircraft鈥檚 assembly and systems testing. A320 fuselages arrive at the line in two segments that are joined to begin the aircraft build-up sequence. The completed, joined fuselage is lifted into a position where the two wings are mated and engine pylons and landing gear fitted.

The A320 Family jetliners then move to a multi-purpose bay for system tests, and the aircraft is readied for cabin installation. This clears the way for the final operations: engine installation, fuel and pressurisation tests, painting, engine run-up and flight testing, followed by aircraft acceptance and delivery.

A220 production in North America

AG真人计划 produces its single-aisle A220 Family jetliners 鈥 comprising the A220-100 and A220-300 versions 鈥 though the AG真人计划 Canada Limited Partnership with Bombardier, which took effect in 2018.

A220 Family aircraft destined for customers outside of the U.S. are produced at the Mirabel final assembly line in Quebec, Canada; while those for the U.S. market are built at AG真人计划鈥 location in Mobile, Alabama 鈥 which also includes a final assembly line for A320 Family aircraft.聽

Assembling the long-range A330/A340

Start FAL A330neo  
Start FAL A330neo
Commercial Aircraft 18 October 2017

Start FAL A330neo

Start FAL A330neo

  • High Resolution
  • Low Resolution

AG真人计划鈥 A330/A340 final assembly line includes multiple stations where specific tasks are performed.

AG真人计划 applied its experience with the A300/A310 and A320 to create a technically advanced, streamlined final assembly line for the A330/A340 long-range family of aircraft, located in a purpose-built facility in Toulouse. Only two final assembly jigs were needed to build up either the twin-engine A330 or the four-engine A340 鈥 with sustained A330 assembly continuing after the A340鈥檚 production phase-out.

The A330/A340 FAL also is built around the 鈥榮tation鈥 principle. At Station 40, the aircraft's outer wings are joined to the centre fuselage and wing. This activity is highly automated, using eight robots situated on either side of the fuselage and above/below the wing. At Station 35, the jetliner鈥檚 three fuselage sections are riveted together, along with installation of the horizontal and vertical stabilisers, landing gear with wheels, and engine pylons. This process is assisted by four robots that move around the fuselage on orbital railways.

The aircraft are then transferred on their own wheels to a large area called Station 30, where four long-range jetliners can be accommodated simultaneously. This is where systems are connected and tested, with ground mechanics conducting some 85 system validations. The mechanics go from aircraft to aircraft in Station 30, rather than having the aircraft move to different positions.

Next, completed A330s are moved outside the final assembly hangar for fuel and pressurisation systems testing. The aircraft鈥檚 engines are then installed and its cabin is fitted before painting, engine run-up and flight testing, all of which precede aircraft acceptance by the customer and delivery.

The A380 final assembly line

A380 FAL  
A380 FAL
A380 Family 27 May 2014

A380 FAL

A380 Final Assembly Line

  • High Resolution
  • Low Resolution

The final assembly line for AG真人计划鈥 21st century flagship A380 is located in Toulouse, France.

Toulouse, France is the home as well for AG真人计划鈥 A380 final assembly line 鈥 a massive facility that provides a space of 150,000 square metres for the flagship double-deck jetliner. The A380 assembly process takes place on a single combined station (a section of the assembly line dedicated to performing a specific task) where all operations except for engine installation are carried out. Representing over one-third of an aircraft鈥檚 value, engines are among the last components to be fitted to the A380 in order to reduce inventory cost.

When all sections have been positioned, a tool jig 鈥 an enormous scaffold 鈥 surrounds the aircraft for the assembly process: the joining of the three fuselage sections, the wings, the horizontal and vertical stabilisers, engine pylons, landing gear and electrical racks.

The aircraft is entirely assembled at this first station, apart from the engines that are installed at the second work station, known as Station 30. Once assembly is complete, the aircraft is towed outside of the hall and back into one of three modular stations to undergo a series of general tests.

These tests are carried out at three identical Station 30s for electrical and hydraulic systems; onboard computers; mobile parts; and the landing gear. Fuel tanks are also tested for leaks; finally, the A380鈥檚 four engines are put in place. AG真人计划 offers customers a choice of two engine types. The aircraft is towed to the south of the Lagard猫re assembly hall for engine testing at the run-up facility. Then the A380 is put through its first test flight.

A380 from dream to reality: the logistics

 

The challenge of transferring the A380鈥檚 various airframe components to Toulouse, France for final assembly has led AG真人计划 to develop its own logistics system for the 21st century flagship jetliner. Watch as a network of transport systems travel by road, river and sea ferry in bringing the components to Toulouse from a range of production locations. Read less Read more

A modern facility for the A350 XWB

A350 XWB MSN1 FAL Section 11 Transfer  
A350 XWB MSN1 FAL Section 11 Transfer
Final Assembly Line 18 July 2012

A350 XWB MSN1 FAL Section 11 Transfer

  • High Resolution
  • Low Resolution

AG真人计划鈥 A350 XWB final assembly line is a 72,000 square metre, L-shaped facility.

AG真人计划鈥 newest final assembly line in Toulouse for the A350 XWB was officially unveiled in October 2012. Designed to have the lowest environmental footprint of any final assembly line ever built by AG真人计划, this 72,000 square metre, L-shaped facility houses the initial stages of final assembly, involving the join-up of fuselage and wings. It also includes 19,000 square metres of annexes (offices, workshops and logistics areas).

A streamlined aircraft assembly process for the A350 XWB allows teams to work in parallel, reducing the time from start of final assembly to aircraft delivery by 30%. Additionally, this production centre was constructed near the existing A330 production facilities in order to provide resources optimisation.

With a new lighting system, roof-mounted photovoltaic solar panels, translucent panels and glass arched roofs, the assembly facility is capable of producing the equivalent of more than half of its own energy.

Further increasing its status as the 鈥榞reenest鈥 final assembly line ever built by AG真人计划, many of the building materials were recycled during the construction work. The taxiway and aircraft parking zone where the building is constructed were planed off, crushed and reused in the new building, thus reducing the volume of materials brought in from quarries. Altogether, some 10,000 cubic metres of materials were recycled.

At full production rates, the A350 XWB programme requires approximately 1,500 employees working at the site.

Focus on: A350 XWB assembly process

A350XWB-MSN3-assembly-startup 2  
A350XWB-MSN3-assembly-startup 2 F. Lancelot
A350-900 20 February 2013

A350XWB-MSN3-assembly-startup 2

The three fuselage sections for AG真人计划鈥 third A350 XWB are shown following their transport to the final assembly line in Toulouse, France 鈥 where they were successfully joined at the facility鈥檚 Station 50

Read more
  • High Resolution
  • Low Resolution

Three A350 XWB fuselage sections are shown after their delivery to the final assembly line.

The A350 XWB industrial process is optimised from start to finish. Build-up of this new-generation jetliner鈥檚 major fuselage sections is completed in a streamlined workflow that moves in steps through several stations within the integration build.

After the cabin鈥檚 galleys and crew rest compartments are installed in the aircraft at Station 59, all is ready for the fuselage join-up at Station 50鈥檚 movable jigs. Installation of the front crew rest and rear galley also is finalised, while the nose landing gear is added to the fuselage.

From here, the aircraft is moved to Station 40, where wings and vertical/horizontal tails are attached 鈥 along with certain other airframe parts, including the landing gear and engine pylons. While the wings and tails are installed, Station 40 also sees cabin interior activity involving the installation of cabin sidewalls, overhead storage racks, carpets, floor surfaces and partitions.

After its transfer to Station 30, the aircraft is subjected to ground tests 鈥 with mechanical, electrical and avionics systems validated in configurations similar to in-flight conditions. Assembly work at this station includes the installation of seats and their cabling, the positioning of door linings, cargo compartment linings, partitions and galley equipment, along with the placement of final structural elements such as the aircraft鈥檚 belly fairing, landing gear doors and wing leading edges.

Design offices and engineering centres

Production

Transport of major aircraft sections

Final assembly and tests

Test programme and certification

Delivering to the customer

Back to top
友情链接:大象彩票  at彩票  7星彩票官网  拉菲彩票  恒大彩票  趣彩彩票  彩88彩票  彩客彩票网  恒耀彩票  正彩彩票官方网站